作者:付汉杰,hankf@xilinx.com,文章转载自:赛灵思中文社区论坛
更换PetaLinux工程的HDF/XSA文件后,PetaLinux工程编译出现FSBL do_configureh错误。使用命令“petalinux-build -x mrproper -f ”,彻底清除工程,再编译工程,不再有问题。
错误记录如下:
DEBUG: Executing shell function do_configure MISC_ARG is -yamlconf /proj/hankf/zcu106/v201/vcu-trd-xv20-plddr/build/tmp/work/zcu106_zynqmp-xilinx-linux/fsbl/2020.1+gitAUTOINC+6cbb920f4d-r0/fsbl.yaml APP_ARG is -app "Zynq MP FSBL" Using xsct from: /opt/Xilinx/peta/2020.1/tools/xsct//bin/xsct cmd is: xsct -sdx -nodisp /proj/hankf/zcu106/v201/vcu-trd-xv20-plddr/build/tmp/work/zcu106_zynqmp-xilinx-linux/fsbl/2020.1+gitAUTOINC+6cbb920f4d-r0/app.tcl -ws /proj/hankf/zcu106/v201/vcu-trd-xv20-plddr/build/tmp/work/zcu106_zynqmp-xilinx-linux/fsbl/2020.1+gitAUTOINC+6cbb920f4d-r0/build -pname fsbl -rp /proj/hankf/zcu106/v201/vcu-trd-xv20-plddr/build/tmp/work/zcu106_zynqmp-xilinx-linux/fsbl/2020.1+gitAUTOINC+6cbb920f4d-r0/git -processor psu_cortexa53_0 -hdf /proj/hankf/zcu106/v201/vcu-trd-xv20-plddr/build/tmp/deploy/images/zcu106-zynqmp/Xilinx-zcu106-zynqmp.xsa -arch 64 -app "Zynq MP FSBL" -yamlconf /proj/hankf/zcu106/v201/vcu-trd-xv20-plddr/build/tmp/work/zcu106_zynqmp-xilinx-linux/fsbl/2020.1+gitAUTOINC+6cbb920f4d-r0/fsbl.yaml INFO: [Hsi 55-2053] elapsed time for repository (/opt/Xilinx/peta/2020.1/tools/xsct/data/embeddedsw) loading 0 seconds INFO: Update hw fsbl_plat project Loading the sw platform from /proj/hankf/zcu106/v201/vcu-trd-xv20-plddr/build/tmp/work/zcu106_zynqmp-xilinx-linux/fsbl/2020.1+gitAUTOINC+6cbb920f4d-r0/build/fsbl_plat/platform.spr Reading the platform : "fsbl_plat" Opening the hardware design, this may take few seconds. Failed to generate bsp for application zynqmp_fsbl while executing "builtin_platform -addbootdomains" (procedure "platform" line 353) invoked from within "platform create -name $params(hwpname) -hw $params(hdf) -out $params(ws)" invoked from within "if { $params(ws) ne "" } { #Local Work Space available if { $params(pname) ne "" } { # hwpname/bspname is empty then default it to pname+_hwproj/b..." (file "/proj/hankf/zcu106/v201/vcu-trd-xv20-plddr/build/tmp/work/zcu106_zynqmp-xilinx-linux/fsbl/2020.1+gitAUTOIN..." line 139) WARNING: exit code 1 from a shell command. ERROR: Execution of '/proj/hankf/zcu106/v201/vcu-trd-xv20-plddr/build/tmp/work/zcu106_zynqmp-xilinx-linux/fsbl/2020.1+gitAUTOINC+6cbb920f4d-r0/temp/run.do_configure.39888' failed with exit code 1: MISC_ARG is -yamlconf /proj/hankf/zcu106/v201/vcu-trd-xv20-plddr/build/tmp/work/zcu106_zynqmp-xilinx-linux/fsbl/2020.1+gitAUTOINC+6cbb920f4d-r0/fsbl.yaml APP_ARG is -app "Zynq MP FSBL" Using xsct from: /opt/Xilinx/peta/2020.1/tools/xsct//bin/xsct cmd is: xsct -sdx -nodisp /proj/hankf/zcu106/v201/vcu-trd-xv20-plddr/build/tmp/work/zcu106_zynqmp-xilinx-linux/fsbl/2020.1+gitAUTOINC+6cbb920f4d-r0/app.tcl -ws /proj/hankf/zcu106/v201/vcu-trd-xv20-plddr/build/tmp/work/zcu106_zynqmp-xilinx-linux/fsbl/2020.1+gitAUTOINC+6cbb920f4d-r0/build -pname fsbl -rp /proj/hankf/zcu106/v201/vcu-trd-xv20-plddr/build/tmp/work/zcu106_zynqmp-xilinx-linux/fsbl/2020.1+gitAUTOINC+6cbb920f4d-r0/git -processor psu_cortexa53_0 -hdf /proj/hankf/zcu106/v201/vcu-trd-xv20-plddr/build/tmp/deploy/images/zcu106-zynqmp/Xilinx-zcu106-zynqmp.xsa -arch 64 -app "Zynq MP FSBL" -yamlconf /proj/hankf/zcu106/v201/vcu-trd-xv20-plddr/build/tmp/work/zcu106_zynqmp-xilinx-linux/fsbl/2020.1+gitAUTOINC+6cbb920f4d-r0/fsbl.yaml INFO: [Hsi 55-2053] elapsed time for repository (/opt/Xilinx/peta/2020.1/tools/xsct/data/embeddedsw) loading 0 seconds INFO: Update hw fsbl_plat project Loading the sw platform from /proj/hankf/zcu106/v201/vcu-trd-xv20-plddr/build/tmp/work/zcu106_zynqmp-xilinx-linux/fsbl/2020.1+gitAUTOINC+6cbb920f4d-r0/build/fsbl_plat/platform.spr Reading the platform : "fsbl_plat" Opening the hardware design, this may take few seconds. Failed to generate bsp for application zynqmp_fsbl while executing "builtin_platform -addbootdomains" (procedure "platform" line 353) invoked from within "platform create -name $params(hwpname) -hw $params(hdf) -out $params(ws)" invoked from within "if { $params(ws) ne "" } { #Local Work Space available if { $params(pname) ne "" } { # hwpname/bspname is empty then default it to pname+_hwproj/b..." (file "/proj/hankf/zcu106/v201/vcu-trd-xv20-plddr/build/tmp/work/zcu106_zynqmp-xilinx-linux/fsbl/2020.1+gitAUTOIN..." line 139) WARNING: exit code 1 from a shell command.
测试版本 petalinux 2020.1